235/85R16 tire size in inches
A 235/85R16 tire is 31.73 inches tall and 9.25 inches wide on a 16-inch rim. These are nominal dimensions from the official sizing formula.
| Dimension | 235/85R16 | This size vs yours | |
|---|---|---|---|
| Overall diameter UN R30 §6.1.2.1 | 31.73 in 805.9 mm | ||
| Section width UN R30 §6.1.2.1 | 9.25 in 235.0 mm | ||
| Sidewall height UN R30 §6.1.2.1 | 7.86 in 199.8 mm | ||
| Rim diameter Marked on the tire | 16 in | ||
| Circumference From diameter | 99.68 in | ||
| Revolutions per mile From diameter | 636 | ||
| Allowed real diameter UN R30 §6.1.5 | 31.26–32.36 in |
Is 235/85R16 a 32-inch tire?
Yes. At 31.73 inches tall, 235/85R16 is commonly called a 32-inch tire. Inch-class names round to the nearest inch; the true nominal height is 31.73 in, and a new tire may legally measure between 31.26 and 32.36 in.
Speedometer change
Example: if your speedometer is calibrated for 265/75R16 and you fit 235/85R16, the tire is +0.2% in diameter, so your true speed differs from the reading as shown below. Enter your current size above to see your own figures.
| Reading | True speed | Difference |
|---|---|---|
| 30 mph | 30.1 mph | +0.1 mph |
| 45 mph | 45.1 mph | +0.1 mph |
| 55 mph | 55.1 mph | +0.1 mph |
| 60 mph | 60.1 mph | +0.1 mph |
| 70 mph | 70.2 mph | +0.2 mph |
| 80 mph | 80.2 mph | +0.2 mph |
Sizes within 3% of 235/85R16
These sizes are within 3% of the diameter of 235/85R16. The 3% figure is a rule of thumb, not a regulation and not a fitment check: wheel width, offset, suspension and body clearance decide what fits. See changing tire size.
| Size | Diameter (in) | Width (in) | Change | ±3% | Ride height (in) |
|---|---|---|---|---|---|
| 255/70R17 | 31.06 | 10.04 | −2.1% | −0.34 | |
| 245/75R17 | 31.47 | 9.65 | −0.8% | −0.13 | |
| 265/65R18 | 31.56 | 10.43 | −0.5% | −0.08 | |
| 265/70R17 | 31.61 | 10.43 | −0.4% | −0.06 | |
| 265/75R16 | 31.65 | 10.43 | −0.2% | −0.04 | |
| 235/85R16 | 31.73 | 9.25 | — | — | |
| 275/55R20 | 31.91 | 10.83 | +0.6% | +0.09 | |
| 255/75R17 | 32.06 | 10.04 | +1.0% | +0.17 | |
| 275/65R18 | 32.07 | 10.83 | +1.1% | +0.17 | |
| 275/70R17 | 32.16 | 10.83 | +1.4% | +0.21 | |
| 285/55R20 | 32.34 | 11.22 | +1.9% | +0.31 | |
| 265/60R20 | 32.52 | 10.43 | +2.5% | +0.40 | |
| 33x12.50R15 | 32.52 | 12.52 | +2.5% | +0.40 | |
| 285/65R18 | 32.59 | 11.22 | +2.7% | +0.43 | |
| 265/70R18 | 32.61 | 10.43 | +2.8% | +0.44 |
Inch equivalent of 235/85R16
In inch terms, 235/85R16 is about 31.7x9.2R16: 31.7 in tall and 9.2 in wide, a 32-inch tire.
| Inch size | Diameter (in) | Change | Width (in) | Dimensions from |
|---|---|---|---|---|
| 32x11.50R15 | 31.54 | −0.6% | 11.42 | UN R54 table |
| 33x12.50R15 | 32.52 | +2.5% | 12.52 | UN R54 table |
| 33x9.50R15 | 32.52 | +2.5% | 9.45 | UN R54 table |
How 235/85R16 is calculated
235 mm section width × 85% aspect ratio = 199.8 mm sidewall (7.86 in).
Overall diameter = rim + 2 × sidewall = 16 in + 2 × 7.86 in = 31.73 in.
Formula: UN Regulation No. 30 §2.15 and §6.1.2.1 (passenger) and UN Regulation No. 54 §6.1.2.1 (light truck). Revolutions per mile = 63,360 ÷ circumference. Full sources are listed at the end of this page.
Questions about 235/85R16
- How tall is a 235/85R16 tire?
- 31.73 inches (805.9 mm) nominal. A new tire may measure from 31.26 to 32.36 in under the official tolerance; the maker's specification gives the figure for a specific tire.
- How wide is a 235/85R16 tire?
- 9.25 inches (235.0 mm) section width. Overall width can be slightly larger; for passenger tires, US rule FMVSS 139 allows 7% over the specified width (or 10 mm, if larger, for some pressure classes).
- How many revolutions per mile does 235/85R16 make?
- About 636 nominal, from a circumference of 99.68 in. Tire makers publish measured revolutions per mile for each tire.
- Will 235/85R16 fit my vehicle?
- This page can't tell you. Check the tire size on your door-jamb placard, then confirm wheel width, offset and clearance with the tire or vehicle maker.
Related
Printed from https://tiresizecalc.net/size/235-85r16/. Figures as published on 2026-11-01. The full working and the official sources are on that page.
Sources
This size is listed by the manufacturer: Goodyear Wrangler DuraTrac, checked on the manufacturer's site on 2026-11-01. The size page shows nominal figures, not that product's measurements.
- UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 2.15 and 6.1.2.1: aspect ratio and outer diameter, D = d + 2H. Retrieved 2026-11-01.
- UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Para 6.1.2.1: the same formula for light truck tires. Retrieved 2026-11-01.
- UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 6.1.5: allowed outer diameter, Dmin = d + 2H x 0.97, Dmax = d + 2H x 1.04. Retrieved 2026-11-01.
- UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Annex 5 Part II Table B: design outer diameter and section width of 33x12.50R15LT. Retrieved 2026-11-01.
- UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Para 6.1.5.1, 6.1.5.3.1 and Table B note 2: allowed outer diameter for table sizes. Retrieved 2026-11-01.
- Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Circumference = pi x diameter; revolutions per mile = 63,360 / circumference; 1 in = 25.4 mm exactly. Retrieved 2026-11-01.
- 49 CFR 571.139 - Standard No. 139; New pneumatic radial tires for light vehicles. National Highway Traffic Safety Administration (NHTSA), Code of Federal Regulations (eCFR). 49 CFR 571.139. eCFR up to date as of 2026-10-15. S6.1.2: passenger tire width up to 7 percent (or 10 mm) over the specified width. Retrieved 2026-11-01.
- 49 CFR 571.110 - Standard No. 110; Tire selection and rims for motor vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less. National Highway Traffic Safety Administration (NHTSA), Code of Federal Regulations, annual edition (GovInfo). 2006-10-01. S4.3: the door placard shows the original tire size. Retrieved 2026-11-01.
Last reviewed 2026-11-01. The full source list, with dates and file checksums, is in How the numbers are calculated. To report an error, email contactus@tiresizecalc.net.