TireSizeCalc

17-inch tire sizes

16 sizes fit a 17-inch rim, from 29.03 to 34.42 inches tall.

All 17-inch sizes compared

SizeDiameterWidthSidewallRevs/mile
235/65R1729.03 in9.25 in6.01 in695
245/65R1729.54 in9.65 in6.27 in683
245/70R1730.50 in9.65 in6.75 in661
265/65R1730.56 in10.43 in6.78 in660
255/70R1731.06 in10.04 in7.03 in649
245/75R1731.47 in9.65 in7.23 in641
265/70R1731.61 in10.43 in7.30 in638
255/75R1732.06 in10.04 in7.53 in629
275/70R1732.16 in10.83 in7.58 in627
285/70R1732.71 in11.22 in7.85 in617
33x12.50R1733.00 in12.50 in8.00 in611
295/70R1733.26 in11.61 in8.13 in606
305/70R1733.81 in12.01 in8.41 in596
285/75R1733.83 in11.22 in8.42 in596
315/70R1734.36 in12.40 in8.68 in587
295/75R1734.42 in11.61 in8.71 in586

Nominal dimensions from the official sizing formula (sources below).

Sources

  1. UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 2.15 and 6.1.2.1: aspect ratio and outer diameter, D = d + 2H. Retrieved 2026-11-01.
  2. UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Para 6.1.2.1: the same formula for light truck tires. Retrieved 2026-11-01.
  3. UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 6.1.5: allowed outer diameter, Dmin = d + 2H x 0.97, Dmax = d + 2H x 1.04. Retrieved 2026-11-01.
  4. Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Not in UN R54 Annex 5 Table B: diameter and width of 33x12.50R17 are the numbers in the size. Retrieved 2026-11-01.
  5. Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Circumference = pi x diameter; revolutions per mile = 63,360 / circumference; 1 in = 25.4 mm exactly. Retrieved 2026-11-01.

Last reviewed 2026-11-01. The full source list, with dates and file checksums, is in How the numbers are calculated. To report an error, email contactus@tiresizecalc.net.