TireSizeCalc

34-inch tire sizes

These 8 sizes measure between 33.5 and 34.5 inches tall (nominal), so they're all called 34-inch tires.

SizeDiameterWidthRim
285/70R1833.71 in11.22 in18 in
305/70R1733.81 in12.01 in17 in
285/75R1733.83 in11.22 in17 in
295/60R2033.94 in11.61 in20 in
275/65R2034.07 in10.83 in20 in
295/70R1834.26 in11.61 in18 in
315/70R1734.36 in12.40 in17 in
295/75R1734.42 in11.61 in17 in

A "34-inch tire" is a rounded name. A real new tire can differ from nominal within the official tolerance shown on each size page; check the maker's published diameter. See inch tire sizes.

Sources

  1. UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 2.15 and 6.1.2.1: aspect ratio and outer diameter, D = d + 2H. Retrieved 2026-11-01.
  2. UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Para 6.1.2.1: the same formula for light truck tires. Retrieved 2026-11-01.
  3. UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 6.1.5: allowed outer diameter, Dmin = d + 2H x 0.97, Dmax = d + 2H x 1.04. Retrieved 2026-11-01.
  4. Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Circumference = pi x diameter; revolutions per mile = 63,360 / circumference; 1 in = 25.4 mm exactly. Retrieved 2026-11-01.

Last reviewed 2026-11-01. The full source list, with dates and file checksums, is in How the numbers are calculated. To report an error, email contactus@tiresizecalc.net.