265/60R20 vs 305/55R20
305/55R20 is +0.69 in (+2.1%) in diameter and 1.57 in wider than 265/60R20.
Size comparison265/60R20
| Dimension | 265/60R20 | 305/55R20 | Difference |
|---|---|---|---|
| Overall diameter UN R30 §6.1.2.1 | 32.52 in 826.0 mm | 33.21 in 843.5 mm | +0.69 in |
| Section width UN R30 §6.1.2.1 | 10.43 in 265.0 mm | 12.01 in 305.0 mm | +1.58 in |
| Sidewall height UN R30 §6.1.2.1 | 6.26 in 159.0 mm | 6.60 in 167.8 mm | +0.34 in |
| Rim diameter Marked on the tire | 20 in | 20 in | 0 in |
| Circumference From diameter | 102.16 in | 104.33 in | +2.17 in |
| Revolutions per mile From diameter | 620 | 607 | −13 |
| Allowed real diameter UN R30 §6.1.5 | 32.14–33.02 in | 32.81–33.74 in |
Nominal, not measuredReal tires vary by brand and load range.
- 265/60R20 32.52 in
- 305/55R20 33.21 in
Speedometer change
mph
If your speedometer is calibrated for 265/60R20 and you fit 305/55R20, the tire is +2.1% in diameter, so your true speed differs from the reading as shown below.
| Reading | True speed | Difference |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 mph |
| 45 mph | 46.0 mph | +1.0 mph |
| 55 mph | 56.2 mph | +1.2 mph |
| 60 mph | 61.3 mph | +1.3 mph |
| 70 mph | 71.5 mph | +1.5 mph |
| 80 mph | 81.7 mph | +1.7 mph |
What changes
- Ride height changes by +0.34 in at the axle (half the diameter change).
- 305/55R20 is the taller tire.
- Revolutions per mile change by -13.
Nominal dimensions from the official sizing formula (sources below). This comparison doesn't check fit: wheel width, offset and clearance decide that. See changing tire size.
Each size
Printed from https://tiresizecalc.net/compare/265-60r20-vs-305-55r20/. Figures as published on 2026-11-01. The full working and the official sources are on that page.
Sources
- UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 2.15 and 6.1.2.1: aspect ratio and outer diameter, D = d + 2H. Retrieved 2026-11-01.
- UN Regulation No. 54 - Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers (Revision 2). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.53/Rev.2. 2004-04-16. Para 6.1.2.1: the same formula for light truck tires. Retrieved 2026-11-01.
- UN Regulation No. 30 - Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers (Revision 3). United Nations Economic Commission for Europe (UNECE). E/ECE/324 E/ECE/TRANS/505 Rev.1/Add.29/Rev.3. 2007-03-29. Para 6.1.5: allowed outer diameter, Dmin = d + 2H x 0.97, Dmax = d + 2H x 1.04. Retrieved 2026-11-01.
- Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Circumference = pi x diameter; revolutions per mile = 63,360 / circumference; 1 in = 25.4 mm exactly. Retrieved 2026-11-01.
- Computed by tiresizecalc.net from the cited formula. Sri Murugan Systems. Speedometer: true speed = indicated speed x new diameter / old diameter. Retrieved 2026-11-01.
Last reviewed 2026-11-01. The full source list, with dates and file checksums, is in How the numbers are calculated. To report an error, email contactus@tiresizecalc.net.